WHEEL ADAPTERS (Changes Bolt Pattern) – Vehicle Must Be 5×108 or 5×4.25 AND Wheels Must Be 5×114.3 or 5×4.5. [CHANGES BOLT PATTERN] Vehicle Must Have 5×108 (5×4.25) bolt pattern. Wheel Must Have 5×114.3 (5×4.5) bolt pattern. Buyers also need to verify: 1 Vehicle Centerbore is no larger than 73.1mm; 2 Wheel studs are M12x1.5 12×1.5mm; 3 Wheel Studs are shorter than 1.25″ (32mm) length; 4 You have 1.25″ (32mm) of space between the fender and the wheel/tire. NOTE: These are WHEEL ADAPTERS which are different from spacers Not for 5×108 (5×4.25) Wheels. Compatible with Jaguar F-Type S-Type XJ XJR XF XFR XFR-S XK XKR XKR-S X-Type. Compatible with Lincoln Continental, LS, Mark 8, Mark VIII. Compatibl with Volvo C30 C70 S40 S60 S80 V50 V70 XC70 XC90. Compatible with Land Rover Range Rover Evoque, Freelander 2, Discovery Sport. Check year/make/model in Description. May fit other vehicles, verify with adapter specifications. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. [PRODUCT BENEFITS] Allows you to install 5×114.3 (5×4.5) Wheels on your vehicle. Provides additional clearance to allow installation of larger or wider rims/wheels/tires. Also fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Gives your vehicles body a more aggressive stance. [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it’s your first time installing auto parts. Check and re-torque all hardware, including lug nuts securing adapter to wheel hub after 25-50 miles. See Description for additional install information. Four (4) Spacers (20 Lug Nuts Included). 5×108 or 5×4.25. 5×114.3 or 5×4.5. T6 Aerospace Grade Aluminum. Metric Grade 10.9. Wheels MUST be 5×114.3 or 5×4.5 Bolt Pattern. Make sure wheel bolt pattern is measured correctly (See Bolt Pattern Diagram below). Measure Your Wheel Bolt Pattern CORRECTLY. Measure Vehicle & Wheel Bolt Patterns Please be sure to measure the bolt pattern of both your vehicle and the wheels. Since 4-lug, 5-lug, 6-lug, & 8-lug patterns are measured differently, use the Bolt Pattern Diagram above to ensure it is measured correctly. We’ve provided the following information as a general reference for purchasing and installing these spacers/adapters. The following list isn’t all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you’re trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help. As shown in the pictures, these spacers do not have a wheel-centric lip. If your wheels do not use conical/cone seat lug nuts, there is a high chance it will not center properly which could result in steering wheel vibration. Hubcentric Rings / HubRings – If your vehicle hub is smaller than 73.1mm, these spacers will not properly center around your hub which could cause steering wheel vibrations. We recommend purchasing hubcentric rings to reduce/prevent steering wheel vibrations. Before Purchasing – Measure your wheel gap for clearance. You will need at least 1.25 (32mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner. The vehicles wheel studs need to be measured. If the studs are longer than 1.25 (32mm), it will extend past the spacer’s surface. It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad. During Installation – Installation should be performed by a trained professional using proper tools. Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components. Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle. ALL Lug Nuts (on the spacers and the wheels) MUST be torqued to manufacture specifications. After Installation – Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing). Inspect and re-torque ALL lug nuts after 25-50 miles of driving. This requires you to take off the wheels to tighten the lug nuts holding the spacers to your vehicle. NOTE: This is an aftermarket/replacement component. The vehicle makes and models used in this listing are registered trademarks of their respective owners, and are used in this listing only to identify the vehicles to which this part fits. View more great items. 2pc 1.5 Thick 5×135 to 5×114.3 Wheel Adapters Spacers, Metric 12×1.5 Studs Nuts. 2pcs – 5mm Flat Hubcentric (no lip) 5×100 Wheel Spacers – 56.1mm Centerbore. 2pcs 25mm (1) Wheel Adapters 5×114.3 to 5×100 Spacers – 12×1.5 Studs Nuts. 1.5 (38mm) Wheel Adapters Spacers – Converts 5×135 to 5×4.5 – 12×1.5 Studs Nuts. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “4pc 1.25 5×108 to 5×114.3 Wheel Spacers / Adapters 12×1.5 Studs for Volvo” is in sale since Friday, August 29, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Wheels, Tires & Parts\Wheel Spacers & Adapters”. The seller is “pe-motorwerks” and is located in Santa Ana, California. This item can be shipped worldwide.

• Brand: Precision European Motorwerks
• Manufacturer Part Number: PE-4x-32mm-5108>5114.3-73.1
• California Prop 65 Warning: Cancer and Reproductive Harm
• Color: Silver
• Seat Type: Cone Seat
• Item Type: Wheel Adapters (CHANGES BOLT PATTERN)
• Centerbore: 73.1mm
• Thickness: 1.25″ (32mm)
• Vehicle Bolt Pattern: 5×108 or 5×4.25
• Wheel Bolt Pattern: 5×114.3 or 5×4.5
• Stud Thread Pitch: 12×1.5
• Nut Thread Pitch: 12×1.5
• Material: T6 Aerospace Grade Aluminum
• Fitment Type: Performance/Custom