CHANGES BOLT PATTERN – Vehicle Must Be 4×114.3 or 4×4.5 AND Wheels Must Be 4×100. [SPECIFICATIONS] Thickness: 1.0″ (25mm) Vehicle Side Bolt Pattern: 4×114.3 or 4×4.5″ Wheel Side Bolt Pattern: 4×100 Centerbore: 67.1mm Stud/Nut Thread Pitch: 12×1.5 [FITMENT] These adapters are only compatible on vehicles with 4×114.3 or 4×4.5 bolt pattern AND wheels with 4×100 bolt pattern. Buyers MUST ALSO check that your Vehicle’s hub size and Stud/Nut Thread Sizing matches the specifications listed above. [CHANGES BOLT PATTERN] Vehicle Must Have 4×114.3 (4×4.5) bolt pattern. Wheel Must Have 4×100 bolt pattern. Buyers also need to verify: 1 Vehicle Centerbore is no larger than 67.1mm; 2 Wheel studs are M12x1.5 12×1.5mm; 3 Wheel Studs are shorter than 1.0″ (25mm) length; 4 You have 1.0″ (25mm) of space between the fender and the wheel/tire. NOTE: These are WHEEL ADAPTERS which are different from spacers Not for 4×114.3 (4×4.5) Wheels. Check year/make/model in Description. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. [PRODUCT BENEFITS] Allows you to install 4×100 Wheels on your vehicle. Provides additional clearance to allow installation of larger or wider rims/wheels/tires. Also fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Gives your vehicles body a more aggressive stance. [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it’s your first time installing auto parts. Check and re-torque all hardware, including lug nuts securing adapter to wheel hub after 25-50 miles. See Description for additional install information. Four (4) Spacers (16 Lug Nuts Included). 4×114.3 or 4×4.5. T6 Aerospace Grade Aluminum. Metric Grade 10.9. Wheels MUST be 4×100 Bolt Pattern. Make sure wheel bolt pattern is measured correctly (See Bolt Pattern Diagram below). Measure Your Wheel Bolt Pattern CORRECTLY. Measure Vehicle & Wheel Bolt Patterns Please be sure to measure the bolt pattern of both your vehicle and the wheels. Since 4-lug, 5-lug, 6-lug, & 8-lug patterns are measured differently, use the Bolt Pattern Diagram above to ensure it is measured correctly. We’ve provided the following information as a general reference for purchasing and installing these spacers/adapters. The following list isn’t all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you’re trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help. As shown in the pictures, these spacers do not have a wheel-centric lip. If your wheels do not use conical/cone seat lug nuts, there is a high chance it will not center properly which could result in steering wheel vibration. Hubcentric Rings / HubRings – If your vehicle hub is smaller than 67.1mm, these spacers will not properly center around your hub which could cause steering wheel vibrations. We recommend purchasing hubcentric rings to reduce/prevent steering wheel vibrations. Before Purchasing – Measure your wheel gap for clearance. You will need at least 1.0 (25mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner. The vehicles wheel studs need to be measured. If the studs are longer than 1.0 (25mm), it will extend past the spacer’s surface. It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad. During Installation – Installation should be performed by a trained professional using proper tools. Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components. Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle. ALL Lug Nuts (on the spacers and the wheels) MUST be torqued to manufacture specifications. After Installation – Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing). Inspect and re-torque ALL lug nuts after 25-50 miles of driving. This requires you to take off the wheels to tighten the lug nuts holding the spacers to your vehicle. NOTE: This is an aftermarket/replacement component. The vehicle makes and models used in this listing are registered trademarks of their respective owners, and are used in this listing only to identify the vehicles to which this part fits. View more great items. 25mm (1.0) 4×114.3 to 4×100 Wheel Spacers Adapters 12×1.5 Stud for Honda Acura. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “4pc 25mm 4×114.3 to 4×100 Wheel Spacers Adapters 12×1.5 for Acura Honda Kia” is in sale since Monday, August 11, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Wheels, Tires & Parts\Wheel Spacers & Adapters”. The seller is “pe-motorwerks” and is located in Santa Ana, California. This item can be shipped worldwide.

• Brand: Precision European Motorwerks
• Manufacturer Part Number: PE-4x-25mm-4114.3>4100-67.1
• California Prop 65 Warning: Cancer and Reproductive Harm
• Color: Silver
• Item Type: Wheel Adapters (CHANGES BOLT PATTERN)
• Centerbore: 67.1mm
• Thickness: 1.0″ (25mm)
• Vehicle Bolt Pattern: 4×114.3 or 4×4.5″
• Wheel Bolt Pattern: 4×100
• Stud Thread Pitch: 12×1.5
• Nut Thread Pitch: 12×1.5
• Material: T6 Aerospace Grade Aluminum
• Fitment Type: Performance/Custom