Posted on April 21, 2023, 2:32 pm By admin
DRIVE LOW WHEN YOU WANT, LIFT WHEN YOU NEED WITH THE PRESS OF A BUTTON. AUTHORIZED USA DISTRIBUTOR FOR STANCEPARTS SUSPENSION COMPONENTS. Add 50mm of lift to your coil-over equipped car. Low when you drive and high when you need. Instant lift due to the 2 gallon tank. This kit includes everything you need to install the air cup lift system. 4 air cups. 12 meters airline. 2x 12v 3-way valve. Pre-wired 16mm LED switch (1 switch, operate front + rear at the same time). Complete VIAIR compressor kit with 2 gallon tank. Note: This listing is for the air-cup suspension kit and fits to your existing coil-overs, it is not for the coil-overs themselves, however we can supply coil-overs to suit most vehicles if you haven’t already got them. Be sure to measure your vehicle’s shock absorber shafts (for both front and rear if you get the full kit), using the fitment instruction sheet at the bottom of this listing, and select the diameter from the dropdown on the ad. These items are special order parts. Although we do carry all cup sizes on the shelf, since there are so many variations, you must choose the correct shaft diameter and ensure these cups will suit your coil-overs. We provide a very detailed fitment check in the included images so you can be certain they will fit before you order. Checking coil-over clearance and springs. Make sure you have enough clearance around the coilovers, the air cups are 120mm in diameter, the fitting is 17mm. (110mm air cups available on request). The air cups can only be installed on linear springs, it will not fit on”shaped” springs as shown in the figure. In some situations shaped springs can be changed to linear springs. Measure the thickest part of the shaft, we strongly recommend to measure with a caliper. Air cups are available for coilover shaft diameters: 12,5mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 40mm and 45mm. Maximum outer diameter: 99mm. Minimum inner diameter: 61mm. (57mm on request) Maximum outer diameter for 110mm air cups: 89mm. In most cases the air cup will take between 20 and 30mm of height. The air cup itself is 20mm thick and with most coilovers the top hat comes on top of the air cup, this will take around 10mm. If there is enough thread left on the coilovers to lower the springs, it won’t be a problem. If not, you will need to install shorter springs. The lift from the air cups comes from the droop / rebound of the coilovers. If you don’t have enough droop, the air cups simply can’t lift the full 50mm. If you’re using the standard spring rates that came with your coilovers, it should be fine. If you’re using higher spring rates we recommend to use helper springs to get the full lift. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Wheels, Tires & Parts\Other Wheel & Tire Parts”. The seller is “streetfxusa” and is located in this country: NL. This item can be shipped worldwide.
- Front Shaft Diameter: 12.5mm
- Rear Shaft Diameter: 14mm
- Brand: Stanceparts
- Manufacturer Warranty: 1 Year
- Universal Fitment: Yes
- Vintage Part: No
- Performance Part: Yes
Categories: stanceparts Tags: adjust, coilover, front, height, lift, rear, ride, stanceparts, suspension