Posted on August 18, 2024, 10:48 pm By admin
Product Description This Groover Is Very Hot Right Away. You Don’t Have to Wait for It to Heat up to Start Grooving. When You Insert This Product, It Immediately Heats up to the Setting on the Dial, Which Has Adjustable Thermal Settings 1 to 4. Check That the Power Supply Meets the Criteria for Tire Slotting. Place the Tire Slotper in a Smooth and Stable Position Before Use. Turn on the Power Switch to See If the Work Light Is on. The Temperature Control Switch Is Set to Half and the Voltage Gear Is Set to Three Gear Positions. The Blade Should Not Be Dry, the Depth of the Knife Is Fixed and some Depth Is Revealed. The Contact Points of the Two Copper Head Clip Blades Are Not Allowed to Be Together, Otherwise the Main Unit Is Easily Damaged. WELCOME TO OUR STORE! Is committed to researching high-quality products that our customers love. Our products have undergone strict quality inspection procedures to ensure that the products put into the market are of high quality. We will sincerely provide you with high-quality service and bring you a pleasant shopping experience. Knives set: 20 pcs. Electric Tire Grooving Tool. This is a tool specifically designed for carving patterns on car tires. It has a fast heating speed and can be used immediately by plugging in the power and setting the temperature. This tire regroover cutteris equipped with 10 U-shaped blades and 10 V-shaped blades, allowing you to carve different patterns according to your preferences and needs. It can be used for carving and refurbishing tires, as well as cutting rubber, foam, etc. Suggest working temperature: 150-200? Weight: About 7kg/15.4lbs. The operation is extremely simple. You only need to connect the power supply, turn on the switch, and turn the temperature knob to the appropriate position to start working. This electric tire groover has a power of 350W, runs smoothly, and has strong kinetic energy. It can quickly heat the temperature to 399? To improve work efficiency. We offer two types of blades: U-shaped and V-shaped, with 10 blades each. Allow you to carve 2-20mm wide and 7-20mm deep tread on the surface of the tire. Check that the power supply meets the criteria for tire slotting. Place the tire slotper in a smooth and stable position before use. Turn on the power switch to see if the work light is on. The temperature control switch is set to half and the voltage gear is set to three gear positions. The blade should not be dry, the depth of the knife is fixed and some depth is revealed. The contact points of the two copper head clip blades are not allowed to be together, otherwise the main unit is easily damaged. While operating the machine, hold the handle with the front blade down and the blade will turn red after three to five seconds. Then loosen the handle immediately, otherwise the blade will burn out after a long time. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Categories: manual Tags: cutter, groover, grooving, machine, manual, regroover, rubber, tire, tires, truck