Posted on October 29, 2024, 8:21 pm By admin
Adapter Thickness: 50mm (2 Inch) each side. Bolt Pattern: 5×135 (Hub) to 6×135 (Wheel). Center Bore: 87.1 mm. Adapter Type: Conversion Adapters. Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between. Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure. Test fit the product before fully bolt down – Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max). Be sure to retorque the adapters after 20-25 miles of driving. The height of the base plate adapter is approx.
Categories: 6061-t6 Tags: 14x2, 50mm, 5x135, 6061-t6, 6x135, adapters, hubcentric, studs, wheel